Audi Tuning in Calgary

Audi S and RS tuning in Calgary

ECUPROGRAM has been tuning Audis in Calgary since 2010. Every calibration is built for your car, your fuel and your hardware, not copied from a generic file. We have completed more than 3,260 calibrations, and every in-shop tune is checked on our dyno with datalogs before the car goes home.

From the S3 and TT S to the RS3, RS5, RS6, RS7 and RS Q8, we tune the engine computer and, where supported, the S tronic or tiptronic gearbox as well.

 

Real results from our dyno

Real cars tuned by ECUPROGRAM and measured on our in-house Dynocom dyno in Calgary: stock run vs. tuned run, wheel horsepower (SAE J1349) and lb-ft of torque. Your results depend on your car, fuel and modifications.

• Audi RS7 Performance tune: 564 to 633 whp (+69), 575 to 656 lb-ft

• Audi S5 3.0 supercharged tune: 273 to 350 whp (+77), 294 to 310 lb-ft

• Audi S3 8V tune: 270 to 311 whp (+41), 315 to 342 lb-ft

• Audi A5 2.0 TFSI tune: 199 to 224 whp (+25), 234 to 283 lb-ft

 

 

Audi engines we tune

• EA888 2.0 TFSI: S3, TT S, A4, A5 and Q5 2.0T

• EA839 3.0 TFSI V6: S4, S5, SQ5 and A6/A7 55 TFSI

• 2.9 TFSI V6 biturbo: RS4, RS5 and RS5 Sportback

• 2.5 TFSI five-cylinder: RS3 and TT RS

• 4.0 TFSI V8 biturbo: S6, S7, S8, RS6, RS7 and RS Q8

• 3.0 supercharged V6: B8 and B8.5 S4 and S5

• 3.0 TDI diesel: Q5, Q7, A6, A7 and A8

 

What is included in an Audi tune

• Full health scan and fault-code check before any changes

• A backup of your original factory software, kept on file

• Boost, fuel, ignition timing and torque limits calibrated for your fuel grade

• Gearbox calibration for the DSG / S tronic and ZF 8HP tiptronic where supported: faster shifts and higher torque limits

• Optional launch, exhaust and throttle-response settings

• Dyno runs and datalogs to confirm safe air-fuel ratios and timing

 

Newer Audi ECUs

Many recent Audi engine and gearbox computers cannot be written through the OBD port alone and must be opened and read on the bench. We do this in the shop in Calgary with professional tools, keep a full backup of the original data, and return the car with factory systems intact. Call us with your VIN and we will tell you what your car needs before you book.

 

Stage 1 and Stage 2

Stage 1 runs on factory hardware and is the best value for most S and RS cars. Stage 2 is hardware-dependent: it needs upgraded parts such as a downpipe, intake, intercooler or turbo, and we confirm your parts list before we build the file. If you are not sure which stage fits your car, call us before you order.

 

Why Audi owners choose ECUPROGRAM

Every tune is written by Miguel, the owner, who has been calibrating performance cars in Calgary since 2010. We are a licensed WinOLS 5 user and work with professional tools including CMD, bitbox and KESS3, so we can read and write the ECU on the bench or through the OBD port, depending on the car.

We do not sell one-size-fits-all maps. Before writing your file we look at your fuel, your modifications, your gearbox and how you drive, whether that is daily driving through a Calgary winter or track days in the summer. If something does not feel right after the tune, bring the car back within 30 days and we will adjust it at no charge.

Browse the Audi tunes and parts above, or contact us for a quote on any model not listed.

 

How to book

Local customers book an in-shop tune in Calgary at 4527 1 St SE. Drop-off is at 9:30 am and we start work at 10:00 am. If you are outside Calgary, we can ship a pre-loaded handheld flasher or build a custom file from a read of your ECU. Every tune includes free adjustments for 30 days, and our refund terms are in section 11 of our policy page.

Questions? Call 403-457-3650 or email ecuprogram@gmail.com.